|
 
Winfax
Lite 3.0
|
|
ZYPCOM 8/5/96
Winfax
Lite v3.0 for Windows
Symantec,
Corp.
http://www.symantec.com/techsupp/
CHANGE
PORT:
You cannot change the port in Winfax Lite without reinstalling the program
entirely.
CHANGE
HANDSHAKE:
This is found in Windows' Control Panel. Select XON/XOFF handshake.
INIT
STRING:
Depending on the version, you will have to pull down different menus. In the
earlier versions, you have to pull down the "Fax" menu, selection
"Setup" and then click on the "More" button to get to the
init string. On later revisions, you will have to pull down the "File"
option, select "Setup", select "Fax", and then click on
the "More" button. From here you can change the init string to
"AT&F&K4&C1&D2S0=0S7=90\".
TERMINAL
MODE:
None. Fax only program.
Winfax
Pro v3.06 for Windows
Symantec,
Corp.
http://www.symantec.com/techsupp/
CHANGE
PORT:
You cannot change the port in Winfax Pro v3.0 without reinstalling entirely.
INIT
STRING:
Pull down the "File" menu, and select "Program Setup".
Click on the "Fax/Modem" button, and you can change the init
string. Set it to "AT&F&C1&D2S0=0S7=90\". Most of our
modems are listed in their list.
TERMINAL
MODE:
None. Fax only program. Known problems are that early versions of Winfax Pro
v3.0 have many problems sending and receiving at 14,400 speeds. Get the
latest driver either from their BBS (number listed above)
Winfax
Pro v4.0 for Windows
Symantec,
Corp.
http://www.symantec.com/techsupp/
CHANGE
PORT:
Pull down the "Setup" menu, and select "Fax/Modem". It is
the first option on the top.
INIT
STRING:
Pull down the "Setup" menu, and select "Fax/Modem". The
init string is automatically put in when you select a modem type, but the
recommended string is "AT&F&C1&D2S0=0S7=90\". We
recommend to use Class 1 protocol and Z32t-SX setting for all Zypcom Z-Series
modems.
As
of 7/28/94, there is another update to this software. This fixes the problems
with fax machines that use T.2 and T.3 fax protocols, such as Konica FAX-280
and Konica FAX-300 fax machines. It also fixed problems receiving from
certain Canon fax machines (exact model numbers unknown). Lastly, there are
changes to ECM which may correct additional send and receive problems.
There
are known problems with "Detect Busy" checkbox. It does not work.
ZYPCOM
8/5/96
COMPANY INFO | WHATS NEW | SALES
INFO | PRODUCT INFO | SERVICE & SUPPORT
DISTRIBUTORS ONLY | WARRANTY REGISTRATION | GUEST BOOK | HOME
 ZYPCOM, Inc
29400 Kohoutek Way, Suite 170
Union City, CA 94587-1212
Tel: 510-324-2501 Fax: 510-324-2414
|
