Qmodem

    ZYPCOM 8/13/96

    QModem Mustang Software chked ver-5.01 6.0

    Find your original file qmpro.ddt in your Qmodem directory.
    Rename it to qmpro.old.
    Copy the new qmpro.ddt into your Qmodem directory.

    Qmodem
    Under Modem/Quick Modem Config!, choose ZYPCOM Z-Series

    Check if the following is correct

    Under MODEM:

    MODEM COMMANDS:

    INITIALIZATION Command: AT&F&C1&D2S0=0&W^M

    Under MODEM:TOGGLES
    :Xon/Xoff: OFF
    :RTS/CTS: ON
    :Lock DTE Baud Rate: ON
    :RTS when Writing=OFF
    :FIFO during shell=ON
    :Lock DTE Baud Rate=ON
    :High Speed Xmit=OFF
    :16500 UART Enable=ON
    :Init ignores CD=OFF

    MODEM:COMMUNICATION PARAMETERS: Default baud rate:38400

    ZYPCOM 8/13/96

COMPANY INFO | WHATS NEW | SALES INFO | PRODUCT INFO | SERVICE & SUPPORT
DISTRIBUTORS ONLY | WARRANTY REGISTRATION | GUEST BOOK | HOME

ZYPCOM, Inc
29400 Kohoutek Way, Suite 170
Union City, CA 94587-1212
Tel: 510-324-2501 Fax: 510-324-2414