Terminate

---

ZYPCOM 8/5/96

Terminate v1.41 for DOS

Bo Bendtsen

(206) 633-1631 - Voice Support (206) 634-3954 - BBS (+45) 42643357 - Fax (Int'l to Denmark)

From terminal mode, hit "Alt-O" to go into the configuration menu. Hit "C" for Communications setup (or highlight the menu choice), and then it will go to a screen like the following:

TERMINATE The final terminal program version 1.41

Copyright (C) 1992-1994 by Bo Bendtsen. All rights reserved

Communications setup

Device name	Device	Port	Baud	Com	Address	Irq	Vector
Async Modem COM1	8250A/16450	1	19200	8N1	$03F8	04	0C
Z34 33600	16550A FIFO	2	57600	8N1	$02F8	03	0B
Async Modem COM3	No UART	3	19200	8N1	$03E8	04	0C
Async Modem COM4	No UART	4	19200	8N1	$02E8	03	0B
Interrupt 14h	Interrupt 14h	1	9600	8N1
ISDN	Fossil	1	64000	8N1
Fossil	Fossil	1	38400	8N1




Configure comport	Async Professional
Check IRQ	_ = Default device


Set default value

Select device to change. SPACE to select default/startup (_)

Highlight the "Async Modem COM" number on the left hand side of the screen and hit to change its parameters. You will then be presented with a screen like the following:

Device setup
Serial interface	UART/Serial
Comport	2
Device name	ZYPCOM
Baudrate	57600
Lock port	Yes
Databits / Stopbits / Parity	8,1,N
Phonebook	TERMINAT.FON
Costfile	TERMINAT.CST
Receive buffer size	2048
Transmit buffer size	4096
Software flow control(Xon/Xoff	Off
Hardware flow control (CTS/RTS	On
Hardware flow control (DSR/DTR	Off
Use 16550 fifo if available	4
Keep 16550 fifo on in shell	No
RTS low while writing	Yes
Auto RTS low trigger	2
Carrier detect mask	128
Init string AT&FW2&C1&D2&S1S0=0^M
Restore port on close	Yes
Close port in shell	No


ZYPCOM 8/5/96


---

ZYPCOM, Inc
29400 Kohoutek Way, Suite 170
Union City, CA 94587-1212
Tel: 510-324-2501 Fax: 510-324-2414